Intelligent lighting is the basis of the entire smart home, especially suitable for large-scale housing, it will make life convenient and comfortable. Lighting control systems are divided into stand-alone, room-specific or large-scale networking systems in which the dimming devices are installed in electrical cabinets and operated by a network of external devices such as sensors and control panels. The advantage of a networked system is the ability to control different areas of the room from a number of points. In the home, a control panel can be installed on the wall near the main entrance as the main control point for multiple rooms.
Compared with the traditional lighting, intelligent lighting can achieve the purpose of safety, energy saving, comfort and high efficiency, so intelligent lighting has good development prospects in the field of smart home.
Green application prospects can be expected
When energy saving has become a major issue related to the sustainable development of social economy such as competitiveness in the international market, resource conservation and environmental protection, it is inevitable to vigorously promote the construction and renovation of the "green home". In the process of building a green home, using intelligent lighting control system brings the effect is very significant. Green lighting applications include the rational use of light sources, electrical accessories, lamps, wiring equipment and dimming and light control devices. For example, full use of natural light, the use of energy-efficient electrical accessories (such as energy-saving ballast and electronic ballast to replace the traditional high-energy inductive ballast), using a variety of energy-saving control devices or devices, using intelligent Lighting control system.
To achieve intelligent lighting
The use of intelligent lighting control system, you can make the lighting system in full automatic state, the system according to a number of basic conditions set in advance to work, these states will set the time each other automatically switch. For example, when a working day is over, the system will automatically enter the night work status, automatically and gently dim each area of light; the same time, the system's motion detection will also take effect automatically, the unmanned area lights automatically turn off , The area will be adjusted to the appropriate light illumination; In addition, you can also programmatically change the brightness of the various regions to adapt to various occasions, different scenarios. Intelligent lighting can automatically adjust the illumination to the level of the most suitable work. For example, natural daylight near the windows and other places where the system will make good use of natural light lighting; when the weather changes, the system can still automatically adjust the illumination to a suitable level. In short, no matter in any place or how the weather changes, the system can ensure that the indoor illumination to maintain a predetermined level.
Energy-saving effect is remarkable
In practical application, intelligent home energy-saving lighting system is mainly reflected in the following aspects. First, focus on management, reduce human waste. Man-made lighting energy waste phenomenon is very serious, no matter the room was still no one, often the "long light." Intelligent lighting system can be decentralized control and centralized management, managers can turn off the unmanned room lights by operating the keyboard. Second, automatic dimming, can make full use of natural light. Intelligent lighting system in the light-sensing switch by measuring the illumination of the work surface, compared with the set value, the control of the lighting switch, so you can maximize the use of natural light, to achieve the purpose of energy conservation, but also to provide an independent of the seasonal and external climate The relatively stable visual environment.
In general, the higher the natural light intensity closer to the window, the lower the illuminance provided by the artificial lighting, but the synthetic illuminance should be maintained at the designed illuminance value. Third, easy to install, save the cable. Intelligent lighting system uses two-wire control, the bus system will be the input unit, the output unit and system components connected to the large cross-section of the load cable from the output of the output unit directly connected to the lighting or other electrical load , Without going through the smart switch. Installation do not have to consider any control, the installation of the entire system and then set the software through the address of each unit code in order to establish the corresponding control relationship. Because the system only uses the load cable connection between the output unit and the load, a large amount of cables that are originally connected to the ordinary switch are saved as compared with the traditional control method, the installation construction time is shortened, and the labor cost is saved. Fourth, to extend the life of the light source. The cause of damage to the light source is the grid over-voltage, over-voltage control can effectively extend the life of the light source. Intelligent lighting control system uses soft start mode, can control the grid impact voltage and surge voltage, so that the filament from thermal shock, light source life is extended. Intelligent lighting system can usually extend the life of light source 2 to 4 times, not only save a large number of light sources, but also greatly reduce the workload of replacing the light source, effectively reducing the operating costs of the lighting system, but also avoid dealing with environmental pollution caused by waste light problem.
- Add: 721, 7/F, CD Tower, Tianjing Building, Tairan 5th Road, Shatou Street, Futian District, Shenzhen, Guangdong, China
- Tel: 0755-82664119 --82664110--61563066 全国服务热线:400-600-1072
- Fax: 0755-61563066
- Email: info@sztris.com
NewsYour position: Home > News